Make the force simulation (static force in tension) and then extract the results from solidworks. Find the maximum static force that produces stresses equal to yield strength.

Machine Elements I Fig.: 3Exercise 1: Shaft design
Exercise 1:
Make the 3D (Exercise1.SLDPRT) and the construction drawings (Exercise1.SLDDRW) of the shaft.

Dr. AntoniosLontos
Machine Elements I Fig.: 4Exercise 2: Shaft design
M12x30
Exercise 2:
Make the 3D (Exercise2.SLDPRT) and the construction drawings (Exercise2.SLDDRW) of the shaft.
30

Dr. AntoniosLontos
Machine Elements I Fig.: 5Exercise 3: Crank Shaft
Exercise 3:
Make the 3D (Exercise3.SLDPRT) and the construction drawings (Exercise3.SLDDRW) of the crank shaft.

Dr. AntoniosLontos
Machine Elements I Fig.: 6Exercise 4: Crank Shaft
Exercise 4:
Make the 3D (Exercise3.SLDPRT) and the construction drawings (Exercise3.SLDDRW) of the crank shaft.

Dr. AntoniosLontos
Machine Elements I Fig.: 7
m, module
N, number of teeth
Parts from library
1. Bearings and gears
2. Safety rings
3. Keys and keyways
d= m*N
d, pitch diameter
m, module
N, number of teeth
Exercise 5: Shaft assembly
Exercise 5:
Make the 3D drawings and the assembly. Find the parts from the library.

Dr. AntoniosLontos
Machine Elements I Fig.: 8Exercise 6: Assembly with fasteners
Exercise 6:
Make the 3D drawings and the assembly. Find the parts from the library.
Part 1
Part 2
1. Bolt M10x1.5, Length 40 mm
2. Nut ISO, M10x1.5
3. Washer for the bolt M10 (ISO 7091)

Dr. AntoniosLontos
Machine Elements I Fig.: 9
Case Study 1
Case Study 2
Exercise 7: Axial force simulation (1/2)
Exercise 7:
Static force simulation using solidworks. Make the force simulation (static force in tension) and then extract the results from solidworks. Find the maximum static force that produces stresses equal to yield strength.
Simulation case study 1Force
Force

Dr. AntoniosLontos
Machine Elements I Fig.: 10Exercise 7: Axial force simulation (2/2)
Extract report
Exercise 7:
Simulation case study 1

Dr. AntoniosLontos
Machine Elements I Fig.: 11
Case Study 1
Case Study 2
Exercise 8: Bending simulation (1/2)
Simulation case study 2
Exercise 8:
Bending force simulation using solidworks. Make the force simulation (static force in tension) and then extract the results from solidworks. Find the maximum static force that produces stresses equal to yield strength.
Force
Force

Dr. AntoniosLontos
Machine Elements I Fig.: 12Exercise 8: Bending simulation (2/2)
Extract report
Exercise 8:
Simulation case study 2